Production & Innovation
Have a tour to our production base and factory, where we made the connectors and assemble a cable…
R&D Service We Provide
We keep innovation in the connectors industry
try our best to offer you better service & products…
Customized Design
Professional engineer team help you with drawing design and provide suggestions based on your special electrical and environmental performance requirements.
Technology Improvement
Establish and optimise the process of the production line. Continuous improvement ensures the targeted quality and yield are achieved and maintained.
Quality Inspection Center
We have a professional testing centre, through which we can test our products’ electrical, mechanical and environmental performance to ensure high quality.
Mould Design Process
We design precision Zinc Alloy, Aluminum Alloy and plastic mould for connector production. With professional equipment and engineer to support the precision connector dimension requirement.
| Machines | Machine Spec | Quantity |
|---|---|---|
| Lathes | YL-15 | 5 sets |
| Milling machines | DSMJ-002 | 3 sets |
| Grinding machine | FSG-618M | 2 Sets |
| Tapping machine | CDK DK-I | 2 Sets |
| Drilling machine | CDK DSYZ-018 | 2 Sets |
Mould Workshop
Die Casting Workshop
Die Casting & Injection processing
The die casting and plastic injection molding process to produce the metal housing or plastic components of electrical connectors. Renhotec has independent die casting workshop and Plastic molding workshop to produce these parts.
To help you reduce cost and ensure the stable quality.
| Machines | Machine Spec | Quantity |
|---|---|---|
| Cold chamber die casting machine | ZHENLI ZLC300 | 10 sets |
| Injection moulding machine | DSMJ-002 | 3 sets |
| Die casting workshop | – | 2 |
| Plastic molding workshop | – | 1 |
Metal lathe processing
Metal processing is to remove unwanted material from a cylindrical workpiece by the machine tool. In Renhotec, we used these machines for tapping, drilling, polishing.
| Machines | Machine Spec | Quantity |
|---|---|---|
| Lathes | YL-15 | 5 sets |
| Milling machines | DSMJ-002 | 3 sets |
| Grinding machine | FSG-618M | 2 Sets |
| Tapping machine | CDK DK-I | 2 Sets |
| Drilling machine | CDK DSYZ-018 | 2 Sets |
| Punching machines | Guoyi GYH-65 | 2 Sets |
Metal lathe Workshop
Assembly Workshop
Assembly Line processing
After all material and components ready, we’ll assemble them by the automatic or manual way to make sure they fit tightly and properly. And with reliable stable performance in an application.
| Machines | Quantity |
|---|---|
| Connector Semi-automatic assembly equipment | 20 sets |
| Cutting wire and stripping machine | 30 sets |
| IPEX(MHF) automatic packaging machine | 10+ Sets |
| Connector Semi-automatic assembly production line | 3-5 |
| Manual assembly production line | 3-5 |
05 Inspection Equipment
We have strict quality control procedures to check our products before shipment.
We have various testing equipment to ensure the quality of our products.
Automatic Insertion Force test Machine
To test the insertion and withdrawal force of connectors automatically, simulate the situation in real use and ensure the durability of our electrical connectors.
High Voltage Insulation Tester
Ensure that electrical devices/equipment are safe with insulation resistance testing.
S-parameter Vector Network Analyzer(VND)
The VNA characterizes high-frequency passive and active devices in their linear mode of operation by measuring their network parameters, called S-parameters.
We inspect our RF Coaxial Connectors by VND to ensure high performance and stability in use.
Salt spray test machine
Create a simulation environment to test the suitability of coatings, paints and metals to resist corrosion or exposure to marine environments.
Get corrosion resistance information on the electrical connectors to ensure our products’ durability and reliability in a severe environment.
Constant temperature and humidity machine
The constant temperature and humidity machine are designed to simulate the product in the climate conditions of temperature and humidity combinations.
Help us inspect the temperature and humidity performance of electrical connectors.
Precision Connector Tester
Precision Connector Tester tests the usability of the cable or cable assembly to ensure all products you receive are of high quality and durability.
Hardness testing machine
Our hardness testing machine uses innovative mechatronic technology for high-precision testing, particularly for quality assurance, production-line testing, and laboratory testing.
X ray fluorescence analyzer
X-Ray Fluorescence (XRF) is a common investigative technique capable of providing qualitative and quantitative data on the composition of a chemical sample.
Connector Manufacturing Supply chain
Contact us
HW49+FG Xinhui District, Jiangmen, Guangdong Province, China
Landline: 0086-027-81296316
Cellphone: 0086-18086610187
Email: [email protected]
Scan or click to chat via WeChat